In-band Management with a NetWare Host
8/15/2017
SMagent must be running on the Netware Host for In-band Storage Managment via the GUI to function.
SMagent is not started automatically (perhaps it should be?).
You need to manually start it in a CONSOLE window (do NOT use your X server window,
as it will be tied up running SMagent).
Remember too, that starting with Yuma1.2, the default folder for Storage Manger files/folders was
switched from SYS:\storagemanager to SYS:\IBM_DS4000 (Yuma12 CMVC 267611).
Thus you need to manually enter this command (assuming default install folders) in your
System Console window:
SYS:\IBM_DS4000\agent\smagent start
1] Ensure that you use the "start" parameter (although why it's needed, is beyond me
- it should be the default)
2] I'm sure that you know the while NetWare ignores case in path names -
NW does require that drive letters (which includes "SYS:") be capitalized.
Then start IBM TotalStorage) StorageManager), you should notice that In-Band
management is available in a few minutes.
Ethernet, Cloud, 40GbE, 100GbE, 802.11x, Fast Ethernet, Gigabit Ethernet, isoEthernet
Fibre Channel
IP, IPsec, IPv4, IPv6, FCIP, iFCP, PPP, SoIP, TCP, TCP/IP, TOE, VoIP
SAN / NAS / SATA / Storage / CIM / Device Discovery